Marksman Extreme Series X9 Installation Manual page 14

Wiring
(continued)
HC4 White 20-Pin Connector
Pink Wire: 200mA Ignition #3 Output (Programmable Operation)
GM VATS Key Override Using ALA984 Relay (may also use optional RS-PLM bypass module):
87
86
85
87A
30
To Ignition
GM VATS Key Override Using ALA985H Relay:
Pink Wire
White
6-Pin
Connector
Violet/Black Wire: (-) 200mA Channel 4 Output
The Violet/Black wire is a programmable (-) output wire that operates when channel #4 is activated with the
remote transmitter. The output of the wire has five different output timer settings to suit any application.
The output current of the Violet/Black is 200mA and can control (1) 30A Bosch type 12 volt relay. (See Alarm
Feature Programming Group 3. The default timer setting is "Pulsed" ground)
Red/White Wire: Channel 3 (Trunk Release) Output
This wire will provide a 1 second pulse
ground when Channel 3 is activated. The
current capacity of this wire is 200mA.
This feature allows you to remote control
trunk release or other electric device. An
additional relay may be required.
14
(continued)
Pink Wire
Passkey Wire
Passkey Wire
Key Side Computer Side
Cut
Resistor
Resistor
87
85
87A
To Vehicle's Ignition Wire
86
30
Red/White
Wire
White 6-Pin
86
Connector
(continued)
White
6-Pin
Connector
Orange or Black Plastic Tube
at Steering Column
Trucks: Red/White or Cars: White
Trucks: Orange/Black or Cars: Black
Yellow
Output to Power
Trunk Switch
87
87a
Constant + 12 Volts
85
30
Input to Relay (+ or -)