Marksman Extreme Series X9 Installation Manual page 20

Extreme series remote starter and alarm system
Hide thumbs Also See for Marksman Extreme Series X9:
Table of Contents

Advertisement

Alarm Feature Programming (Group 2)
Step 4
Exit Programming
Alarm Feature Programming (Group 3)
Step 1
ON
With the ignition switch in the OFF position, Turn the
ignition switch On - Off - On - Off - On - Off
Use the transmitter buttons as illustrated to adjust the features required. Keep repressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirps/beeps is heard. Move on to the
next feature.
One Chirp
Button
LED One Pulse
(Factory Default Setting)
HC2 Brown Wire
Constant (+) Siren Output
HC6 White Wire =
Dome Light Output
HC6 Light Brown Wire =
Horn Output
HC6 Violet/Black Wire
(-) Channel 4 Output
1 Pulse Output
HC8 White/Blue Wire =
+
1 Pulse Activate
20
(continued)
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will confirm exit of the
programming mode.
Note: Waiting 15 seconds after the last command will also cause the
system to automatically exit the programming mode.
O FF
3X
Before 15 seconds has passed, push and release the
valet switch 6 times holding the button down on the
6th press. Wait until 3 short chirp/beeps + 1 long
chirp/beep is heard. Release the button. You are now in
"Alarm Feature Programming (Group 3)" mode.
Step 3
Two Chirps
LED Two Pulses
LED Three Pulses
HC2 Brown Wire
5 Sec On - 5 Sec Off
Pulsing (+) Siren Output
HC6 White Wire = 2-Step
Factory Security Disarm
Door Unlock Output
HC6 Light Brown Wire =
HC6 Light Brown Wire =
Factory Security Rearm
Start Status (Shock Sensor
Signal Output
Bypass Control) Output
HC6 Violet/Black Wire
HC6 Violet/Black Wire
(-) Channel 4 Output
(-) Channel 4 Output
Latched Output and Reset
Output as Long as TRX
with Ignition "ON"
Button is Held Down
HC8 White/Blue Wire =
HC8 White/Blue Wire =
2 Pulse Activate
Step 2
5X + 1X (Hold)
Three Chirps
Four Chirps
LED Four Pulses
HC2 Brown Wire
Car Horn Type (+) Output
HC6 White Wire =
HC6 White Wire =
Ground Output
During Start (Crank)
Signal Output
HC6 Violet/Black Wire
(-) Channel 4 Output
Output for 15 Seconds
3 Pulse Activate

Advertisement

Table of Contents
loading

Table of Contents