Marksman Extreme Series X9 Installation Manual page 18

Alarm Feature Programming (Group 1)
Press the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps is heard then move on to the
next feature.
One Chirp
Button One LED Pulse
(Default Setting)
All Chirps On
Manual Arming
Automatic Rearm Off
Instant Door Ajar
Error Chirp
+
Car-Jack Mode is Off
Normal Function
+
Horn Output
Normal Horn Output
Pulse Duration
Five Chirps
+
Five LED Pulses
PVID 4 Horn Output
S-M-L-S-M-L
Step 5
Exit Programming
O FF
18
(continued)
Step 3
Remote Feature Programming
Two Chirps Three Chirps
Two LED Pulses Three LED Pulses
Horn Only
Siren Only
Automatic Arming without
Automatic Arming
Automatic Door Locking Automatic Door Locking
Automatic Rearm On
45 Second Delay
Door Ajar Warning
Manual Car-Jack Automatic Car-Jack
Mode is On Mode is On
Horn Output for Alarm
Trigger, Panic and
Car-Finder Only
PVID 1 Horn Output PVID 2 Horn Output
S-S-S - L-L-L - S-S-S S-L-S-L
Six Chirps
Note: Horn output settings are valid for the
Six LED Pulses
Brown wire and the White/Black wire when
they are programmed to operate as Horn
PVID 5 Horn Output
output.
S-S - L - S-S
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will confirm exit of the
programming mode.
Note: Waiting 15 seconds after the last command will also cause the
system to automatically exit the programming mode.
Four Chirps
Four LED Pulses
All Chirps Off
PVID 3 Horn Output
S-S-S-L