Remote Control Transmitters The LCD screen on the 2-way remote control displays graphic icons. It provides visual information on any trigger of the sensors and around the clock surveillance of your vehicle, as well as displaying the present status of the system. SAVE 2-Way LCD Remote LCD Display Icons...
Quick Reference Remote Transmitter Operation (2way and 1way Remotes) Transmitter Button System Function Remark Lock Doors and Arms System Arm and Delete the 2-Stage Press Twice within 3 Seconds Shock Sensor Arm System and Press Each within 3 Seconds. Hidden Alarm Function Silent Arming/Disarming Ignition in “Off”...
LCD Transmitter Setup and Operation Vibration/Melody Mode This mode is useful when you are in a noisy place and it is difficult to hear the beep from the transmitter. While in the “Vibration/Melody” mode, the transmitter will vibrate if your security system has been activated.
LCD Transmitter Setup and Operation (continued) Press Buttons at the Same Time: Then Press Button Within: System Function Switching to 2nd Vehicle or Returning to 1st 5 Sec. Vehicle Operation Melody / Vibration Mode 5 Sec. Power Save Mode 5 Sec. LCD Screen Lamp Turns On for Five Seconds System Status Check...
Alarm Indicators (continued) Parking Light Flash Indicators Flash Function 1 Flash System is Armed 2 Flashes System is Disarmed 3 Flashes Disarmed / Triggered 12 Flashes Car Locator Siren/Horn Chirp Indicators Chirp Function 1 Chirp System is Armed 2 Chirps System is Disarmed 3 Chirps Ajar Warning...
Security Operation (LCDTX and STD TX) Manual Arm/Lock 1. Press the button on the transmitter. 2. The siren will chirp once and parking lights will flash once indicating that the system is now armed. The vehicle’s doors will lock upon arming. Door Ajar Trunk/Hood Ajar System Armed...
Security Operation (continued) Automatic Arming Bypass While the system is in Disarmed Mode, press the button twice. The horn/siren will respond with one chirp and the LED will turn “On”. The security system will remain in this mode for as long as you wish.
Security Operation (continued) Valet Mode Operation The valet mode allows you to temporarily bypass all alarm functions eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in “Valet” mode, all alarm functions and remote start functions are bypassed. However, the remote panic feature and remote door locks remain operational.
Security Operation (continued) Anti-Car Jacking Operation (Optional) Warning: This security system has a car jacking feature. Its default setting is “Off”. So be sure to enable this feature if you feel it is needed. Active Anti-Car Jacking 1. Press and hold the transmitter buttons at the same time for 2 seconds while the vehicle’s ignition is “On”.
Security Operation (continued) Dome Light Supervision (Optional) The security system has a unique feature for using your vehicle’s dome light: 1. Upon disarming the vehicles security system, the interior dome light will remain on for 30 seconds. 2. If the security system is triggered, the dome light will flash for the same duration as the horn/siren.
How to Control a Second Marksman Security System If your transmitters have been programmed to a second Marksman security system, follow the steps below: For LCD Remote Control Transmitter Second Vehicle Operation: 1. Press and hold buttons at the same time until one long beep is heard.
$ PRICE 2-Way LCD Remote for X4 Security System X4-RFLCD1 $139.95 ea. SAVE 1-Way Remote for X4 - X7 Security System X7RF $59.95 ea. BATTERIES 1.5 Volt AAA Alkaline Battery CR2032 - 3 Volt Lithium Battery (1 pc.) Models: Radio Shack: #23-162...
Page 15
Parts and Accessories Order Form Credit Card or Money Order Only Mail to: Magnadyne Corporation ATTN: Consumer Parts Sales (Sorry No Cash, C.O.D. or personal checks accepted) P.O. Box 5365 Call: (310) 884-7777 Fax: (310) 637-9542 Carson, CA 90749-5365 SHIP TO: (No P.O. Boxes) LAST NAME FIRST NAME INITIAL...