Overview - Epson Stylus COLOR 800 Service Manual

4.1 Overview

This section describes adjustment required when the printer is reassembled after repair. Read the
instructions headed under "CAUTION" before starting adjustment.
; Always perform adjustment using the program specified for each unit.
; Ink cartridge used for this printer is one-time-cartridge. If the same cartridge is reinstalled, bubbles
are formed in the printhead, which might cause dot missing. Therefore always install a new
cartridge after removing the used one for repair.
; The ink consumption counter is reset when the cartridge is replaced during the ink cartridge
change sequence. Therefore be sure not to replace the ink cartridge without putting the printer in
the ink cartridge change mode.
; Use 720 dpi exclusive paper when printing the adjustment pattern.
; Perform the each adjustment by using exclusive adjustment program.
Rev. A
CAUTION
Adjustment
4-1