EPSON Stylus &2/25 800
3.13.7 I/S (Ink System) Frame Removal
When releasing joints linking the I/S frame and right frame, be careful not to bend the
frames.
1. Remove the pump assembly. (Refer to Section 3.13.2.)
2. Remove the top frame. (Refer to Section 3.13.5.)
3. Remove the head FFCs from the sub cable holder. (See Figure 3-58.)
4. Remove 2 screws (CBS, 3x6, F/Zn) securing the I/S frame and right frame. (See Figure
3-59.)
3-44
CAUTION
Figure 3-57. Head FFC Removal
Figure 3-58. I/S Frame Removal (1)
Rev. A