EPSON Stylus &2/25 800
1.6.6 Printer Initialization
This printer has the following three initialization types: Power-on initialization, Operator initialization, and
Software initialization.
Power-on Initialization
Triggers
Actions performed:
Initializes the printer mechanism.
Clears input data buffer.
Clears download character set.
Clears print buffer.
Refer to Section 1.5.7, Initialization Items and Values
Operator Initialization
Triggers
Actions performed
Clears input data buffer.
Clears download character set.
Clears print buffer.
Refer to Initialization Items and Values
Software Initialization
Trigger
Actions performed
Clears print buffer.
Refer to Initialization Items and Values
1-24
Turning on the printer
Cold reset command (remote RS command).
Turning the printer off and back on again within 10 seconds
The printer recognizes the INIT signal (negative pulse) on the
parallel interface.
ESC @ command
Rev. A