EPSON Stylus COLOR 760
1. When installing the Waste Ink Absorber Tray Assembly,
make sure to fix it with the Spacer Tray in the left side of
the printer mechanism. Refer to the Figure 4-11.
2. Be careful not to damage Loop Scale when the Tray Spacer
is removed.
1. When the Waste Ink Absorber was replaced, perform the
following Panel Reset Function for ink overflow counter.
Turn on the Printer while holding the "Load/Eject
SW"+"Cleaning SW", and hold "Cleaning SW" 10 seconds.
For details, Refer to the Chapter 5 Section 5.2.3.11.
Otherwise, perform the waste ink counter reset operation
by using the adjustment program.
Space Tray
Figure 4-11. Installing the Spacer Tray
Disassembly and Assembly
Disassembly Procedures
Revision C
86