Initial Ink Charge Operation - Epson Stylus COLOR 760 Service Manual

EPSON Stylus COLOR 760

5.2.3.9 Initial Ink Charge Operation

After replacing any of the following units, perform Initial ink charge and
return the printer after making sure that ink is ejected correctly from the
printhead.
n After replacing the printer mechanism
n After replacing or removing the printhead
Before you perform the initial ink charge operation,
replace the installed ink cartridges with new ones,
because the ink amount used for the initial ink charge
operation is so large.
1. Select the "Maintenance" menu. The following menu appears.
Figure 5-40. Select the Maintenance menu
Adjustment
2. Select the "Initial Ink charge" item from "Maintenance Menu" and
click the "OK" button.
NOTE: As described in the menu message, about 1/6 amount of
the Black ink cartridge and 1/9 amount of the Color ink
cartridge are consumed in the initial ink charge operation.
Figure 5-41. Select the Initial Ink Charge
NOTE: The initial ink charge is carried out without turning off/on the
printer. It takes about 2 minutes for this operation to
complete the whole sequence.)
Adjustment
Revision C
133