Epson COLOR 760 Printer Basics Manual
Epson america, inc. printer user guide
Hide thumbs
Also See for COLOR 760:
- Service manual (172 pages) ,
- Daily use (78 pages) ,
- Product information manual (13 pages)
Related Manuals for Epson COLOR 760
Summary of Contents for Epson COLOR 760
-
Page 1: Epson Stylus Color
EPSON Stylus COLOR 760 ® EPSON Stylus COLOR 860 ® Printer Basics Printed on recycled paper with at least 10% post-consumer content. -
Page 2: Copyright Notice
SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers. -
Page 3: Table Of Contents
Ink Cartridge Safety Instructions VIEWING YOUR ELECTRONIC PRINTER MANUAL Accessing Your Electronic Printer Manual Navigating Your Electronic Printer Manual PRINTING FROM START TO FINISH Using the EPSON Guided Printing Exercise Printing with Windows Loading Paper Opening the Printer Software Selecting Printer Software Settings... - Page 4 Printing with PhotoEnhance Using Custom Project Types Using Advanced Settings Using Special Papers EPSON Photo Quality Ink Jet Paper Matte Paper - Heavyweight EPSON Photo Paper Envelopes Selecting the Correct Media Type MAINTAINING YOUR PRINTER Cleaning the Print Head Using the Head Cleaning Utility...
- Page 5 Diagnosing Printer Problems Checking the Control Panel Lights Running a Printer Check Identifying Printer Parts Problems and Solutions Problems Setting Up the Printer or Installing Software Problems with Printing Problems Getting Good Print Quality Problems with Paper Feeding Solving Miscellaneous Printout Problems...
-
Page 7: Welcome
Resolutions up to 1440 by 720 dpi (dots per inch), even on plain paper Fast print speeds: EPSON Stylus COLOR 760 prints approximately 7 ppm (pages per minute) for black text and 6 ppm for color; EPSON Stylus COLOR 860 prints approximately 9.5 ppm for black text and 7 ppm for color EPSON’s exclusive Micro Piezo... -
Page 8: About Your Software
About Your Software The printer software CD-ROM includes all the software you need for printing: Your printer driver runs your printer and lets you control how your documents look. You can’t use your printer without it. ® The EPSON Guided Printing Exercise, a quick step-by-step guide to changing... -
Page 9: About Your Documentation
For more details about printing with, maintaining, or troubleshooting your printer, see your electronic Reference Guide. For instructions on viewing it, see page 9. (The illustrations in this book show the EPSON Stylus COLOR 860; the EPSON Stylus COLOR 760 has a solid color cover.) -
Page 10: Windows System Requirements
Windows System Requirements To use your printer and its software, your system should have: ® An IBM compatible PC with at least a 486/66 MHz (for Windows 98) or 486/25 MHz (for Windows 95 or Windows NT processor recommended) Microsoft Windows 95, Windows 98, or Windows NT 4.0 At least 16MB of RAM (32MB for Windows 95 or 98, or 64MB for Windows NT 4.0 recommended) -
Page 11: Macintosh System Requirements
Double-speed (2 ) CD-ROM drive (quad-speed [4 installing the printer software A shielded USB “AB” cable from Series A (computer) to Series B (printer), up to 6.5 ft. (2 meters) long. Using an improperly shielded USB cable—especially a cable more than 6.5 ft. (2 meters) long—may cause the printer to malfunction. -
Page 12: Energy Star Compliance
Year 2000 Ready Your EPSON printer is Year 2000 Ready. However, be sure the other parts of your computer system are also ready for the year 2000. Important Safety Instructions... -
Page 13: Ink Cartridge Safety Instructions
Do not let the power cord become damaged or frayed. If you use an extension cord with the printer, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. - Page 14 Do not shake an ink cartridge; this can cause leakage. Do not move the print head by hand; otherwise you may damage the printer. Before transporting the printer, make sure the print head is capped in the far right position and the ink cartridges are in place.
-
Page 15: Viewing Your Electronic Printer Manual
Your printer software CD-ROM includes an electronic Reference Guide for your printer. The manual is in HTML format, so you need a browser—such as Internet Explorer 3.0 or later or Netscape Navigator 3.0 or later—to view it. If you are using a different browser, the pages may not display correctly. -
Page 16: Navigating Your Electronic Printer Manual
Click a topic on the left to expand the table of contents. ) or Install ) and view it from there. , and double-click Programs EPSON EPSON Stylus COLOR 760 View Reference Guide ESC760 Guide EPSON Stylus COLOR 860... - Page 17 After expanding the table of contents, you can click on the topic you want to view. If there’s a right arrow , click it to view subtopics, then click on a topic to go to it. Click the down arrow Closed list, click to expand...
-
Page 19: Printing From Start To Finish
Selecting a preset project type or a color-matching method, on page 26 Fine-tuning your settings for maximum control of your printouts, on page 28 Using special papers such as EPSON Photo Paper or envelopes, on page 31 Using the EPSON Guided Printing Exercise... -
Page 20: Printing With Windows
If you didn’t install the Guided Printing Exercise when you set up your printer, follow these steps to install it: 1. Insert the printer software CD-ROM. 2. Windows: Double-click drive icon, then double-click the Macintosh: Double-click the icon. The Main Menu appears. -
Page 21: Opening The Printer Software
Keep the following in mind when loading paper: Load the printable side face up. It’s usually whiter or brighter than the other side. Load letterhead or preprinted paper into the printer top edge first. Don’t load paper above the arrow on the left edge guide. -
Page 22: Selecting Printer Software Settings
If you click the print icon on your application’s tool bar instead of selecting Print from the File menu, you may not get the option to change the printer software settings before printing. Selecting Printer Software Settings Once you click... - Page 23 What’s This?. Selecting Windows Default Settings The printer settings you make apply only to the application you’re currently using. If you usually print one type of document in different applications—for example, black ink on legal size paper—you can change the default printer settings for all your programs.
-
Page 24: Controlling Printing
Epson Printing Tips below For more advanced printer settings, see pages 23 through 30. For more information on printing—for example, previewing your printout, changing the paper size, or adding a watermark—see your electronic Reference Guide (described on page 9). -
Page 25: Printing On A Macintosh
Keep the following in mind when loading paper: Load the printable side face up. It’s usually whiter or brighter than the other side. Load letterhead or preprinted paper into the printer top edge first. Don’t load paper above the arrow on the left edge guide. -
Page 26: Opening The Printer Software
Make the following selections on the page setup dialog box: Make sure your EPSON Stylus COLOR printer model ( selected. (If the model is incorrect, you need to select your printer in the Chooser; see the Start Here poster for instructions.) Select the correct document. -
Page 27: Selecting Printer Software Settings
(or an in-between setting) for the paper you’re using. (The slider is not available when certain media types are selected.) When you’ve selected your settings, click . You see the main printer settings dialog box Print Select faster or higher-quality printing, or in-between you’re printing on (click the... -
Page 28: Controlling Printing
If you turned on background printing, you can select Application menu at the right side of the menu bar to check the progress of your print job. You see the EPSON Monitor3 dialog box: Click to pause printing Click on your print job. -
Page 29: Printing With Photoenhance
Guide for details. (You can often make these settings in your application software. If so, you should make the changes there.) 3. Access the printer settings dialog box as described on page 15 (Windows) or page 20 (Macintosh). from the File menu. See your electronic Reference... - Page 30 You see one of these dialog boxes: Windows 4. Choose the Media Type select, see page 35.) 5. Choose ink. (You cannot select PhotoEnhance if Color 6. Click PhotoEnhance 7. If your photograph was taken with a digital camera, you can click the Camera Correction photographs taken with a film camera.
- Page 31 , depending on your application) to start printing. Print Macintosh: Click Print For more details on the printer settings, see your electronic Reference Guide, as described on page 9. . You see a list of Standard ) or select one of the Nature ).
-
Page 32: Using Custom Project Types
Using Custom Project Types Your EPSON Stylus COLOR printer software includes custom project types with preset options for printing specific types of documents—such as reports, graphs, or drafts. These options let you quickly select the best settings for your particular type of document and paper, or select a color-matching method for your project. - Page 33 Macintosh 7. Choose a project type following these guidelines (these settings are restricted by your Media Type and Ink settings): : For printing graphics-intensive documents like presentations Text/Graph with charts and graphs. : For printing rough drafts of text on plain paper. Saves ink. Economy (Image Color Matching;...
-
Page 34: Using Advanced Settings
Guide for details. (You can often make these settings in your application software. If so, you should make the changes there.) 3. Access the printer settings dialog box as described on page 15 (Windows) or page 20 (Macintosh). 4. Select your Media Type and Ink settings. - Page 35 5. Click and then click the Custom, box: Click here to change your Print Quality (resolution) Windows Click here to change your Print Quality (resolution) Macintosh 6. Check the displayed Media Type and Ink settings you selected on the main dialog box.
- Page 36 9. Select any other settings you need to change. Many of the settings are automatically selected by other settings you choose. For details on all the printer software settings, see your electronic Reference Guide. After you customize your print settings, you can save them as a group.
-
Page 37: Using Special Papers
Check out the EPSON Photo Quality Media Pack that came with your printer. Instructions for printing on the samples, along with other papers, are given in the following sections. For a list of EPSON special ink jet papers and ordering information, see the inside back cover. EPSON Photo Quality Ink Jet Paper EPSON Photo Quality Ink Jet Paper is great for presentation materials and newsletters. - Page 38 If you’re using 4 6-inch or Panoramic Photo Paper, see the next sections. 6-inch Photo Paper EPSON 4 6-inch Photo Paper is micro-perforated around the edges so you can trim your printouts and “bleed” the photo—extend it to the edge of the paper—on all sides.
-
Page 39: Preserving Photos On Epson Photo Paper
Depending on the type and intensity of the light your print is exposed to, a print on EPSON Photo Paper may last two or more years before noticeable fading occurs. Fade resistance could decrease in intense light conditions or increase if your print is protected by glass or special laminates. -
Page 40: Envelopes
Envelopes You can load up to 10 envelopes at a time, flap edge first and printable side up. Place them against the right edge guide and slide the left edge guide against them. (You’ll get better results if you press each envelope flat before loading it, or load one envelope at a time.) Set the thickness lever to the... -
Page 41: Selecting The Correct Media Type
Here are the settings you should choose for your paper: For this paper . . . Plain paper sheets or envelopes EPSON 360 dpi Ink Jet Paper EPSON Iron-On Cool Peel Transfer Paper EPSON High Quality Ink Jet Paper EPSON Photo Quality Ink Jet Paper... -
Page 43: Maintaining Your Printer
Cleaning the print head uses ink, so clean it only if print quality declines. You can clean the print head in either of the following ways: using the Head Cleaning utility (when the printer is connected to a local port, not over a network), as described on page 38 using the printer’s control panel buttons, as described on page 39... -
Page 44: Using The Head Cleaning Utility
Follow these steps to run the Head Cleaning utility: 1. Make sure the printer is turned on but not printing, and both the B black and A color ink out lights are off. (If an ink out light is flashing, replace the ink cartridge instead.) -
Page 45: Using The Control Panel To Clean The Print Head
Follow the steps below to clean the print head. (See page 49 for more control panel information.) 1. Make sure the printer is turned on but not printing, and both the B black and A color ink out lights are off. (If an ink out light is flashing, replace the ink cartridge before continuing.) -
Page 46: Examining The Nozzle Check Pattern
8. If you don’t see any improvement after cleaning three or four times, check the solutions beginning on page 55. You can also turn the printer off and wait overnight—this allows any dried ink to soften—and then try cleaning the print head again. -
Page 47: Replacing An Ink Cartridge
Otherwise the ink remaining in the print head nozzles may dry out. Use these EPSON ink cartridges within six months of installing them and before the expiration date on the package: Black ink cartridge:... -
Page 48: Removing And Installing Ink Cartridges
You can replace a cartridge when the B black or A color ink out light is either flashing or on. (If you perform these steps when both ink out lights are off, the printer cleans the print heads as described on page 37.) Be sure you have a new ink cartridge before you begin. - Page 49 The printer moves the print head and begins charging the ink delivery system. The Ppower light flashes, and the printer makes noise. Charging takes about 30 seconds. When it’s finished, the Ppower light stops flashing and stays on.
-
Page 50: Replacing An Outdated Ink Cartridge
Follow these steps to replace an ink cartridge before the B black or A color ink out light is flashing or on: 1. Make sure the printer is turned on and not printing (the Ppower light should be on, but not flashing), then open the printer cover. - Page 51 The Ppower light flashes and the printer makes noise. Charging takes about 30 seconds. When it’s finished, the Ppower light stops flashing and stays on. Never turn off the printer while the Ppower light is flashing, unless the printer hasn’t moved or made noise for more than...
-
Page 52: Aligning The Print Head
Aligning the Print Head If your printouts contain misaligned vertical lines, you may need to align the print head. Your printer must be connected to a local port, not on a network, to use the Print Head Alignment utility. Follow these steps: 1. -
Page 53: Cleaning The Printer
Cleaning the Printer To keep your printer working at its best, you should clean it several times a year. Follow these steps: 1. Turn off the printer, unplug the power cord, and disconnect the printer cable. 2. Remove all the paper from the sheet feeder. -
Page 54: Transporting The Printer
Be sure to remove the tape used in step 4 after installing the printer in its new location. 1. Turn on the printer, wait until the print head locks in the far right position, then turn off the printer. 2. Unplug the power cord from the electrical outlet. Then disconnect the printer cable from the printer. -
Page 55: Problem Solving
Then see “Problems and Solutions” on page 53 for solutions to common setup and software problems. It’s a good idea to check EPSON’s web site periodically for possible updates to your printer driver. Visit www.epson.com and check the section for your product to see if there is a new driver available for downloading to your computer. - Page 56 44. If the lights still flash and/or come on, contact your dealer or EPSON; see page 61 for contact information.
-
Page 57: Running A Printer Check
If the check page doesn’t print, you may have a problem with your printer. Try the suggestions in “Problems and Solutions” beginning on page 53. If nothing seems to work, contact your dealer or EPSON as described on page 61. -
Page 58: Identifying Printer Parts
Identifying Printer Parts If you need help identifying the parts of the printer, refer to these illustrations: sheet feeder left edge guide paper support right edge guide printer cover output tray output tray extensions thickness lever ink cartridge holders control panel... -
Page 59: Problems And Solutions
Problems and Solutions Here are some basic troubleshooting tips if you have any problems setting up your printer, installing software, getting good print quality, feeding paper, or other miscellaneous problems. Problems Setting Up the Printer or Installing Software The printer started making noise after ink cartridge installation . -
Page 60: Problems With Printing
If you’re printing on a network, you need to set up your printer for network printing, as described in your electronic Reference Guide. The printer sounds as though it is printing, but nothing prints . -
Page 61: Problems Getting Good Print Quality
See page 46 for instructions. Check the paper thickness lever position. If it’s in the your printer is set for thicker paper or envelopes and your image may have banding. For most papers, set the paper thickness lever to the position. - Page 62 See page 46 for instructions. Check the paper thickness lever position. If it’s in the your printer is set for thicker paper or envelopes and your image may smear. For most papers, set the paper thickness lever to the shown on page 55.
- Page 63 PhotoEnhance. Try using Automatic mode. See page 16 (Windows) or page 21 (Macintosh) for instructions. Make sure your printer and port are selected in your software. Your printed colors can never exactly match your on-screen colors. However, you can use a color management system to get as close as possible.
-
Page 64: Problems With Paper Feeding
(If the S paper out light is flashing, paper is jammed.) When you reload the paper, make sure the left edge guide fits the paper. Paper jams inside the printer . . . settings Turn off your printer, open the cover, and remove all the paper that’s inside, including any small... -
Page 65: Solving Miscellaneous Printout Problems
Flip Horizontal printer software or the mirror setting in your application software. (If you’re printing on EPSON Iron-On Cool Peel Transfer Paper, the image should be inverted so it looks correct when it’s ironed on.) The printer prints blank pages . . . -
Page 66: Uninstalling Printer Software
Install list at the top and select bottom and follow the instructions. Restart your Macintosh. Reinstalling Printer Software Before reinstalling your printer software, first uninstall it as described above. Windows 1. USB connection: Follow the plug-and-play software installation instructions on your Start Here poster. -
Page 67: Where To Get Help
If you need help with your printer or its software, see the contact information below. For help with the creative applications on the printer software CD-ROM, see page 62 for contact information. If you need help using other software with an EPSON product, see the documentation for that software for technical support information. -
Page 68: Creative Software Technical Support
Computer configuration Description of the problem You can purchase ink cartridges, paper, manuals, and accessories from EPSON Accessories at (800) 873-7766 or visit our web site at www.epsonsupplies.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral... -
Page 69: Index
Glossy media, 35 Graph setting, 27 Guided Printing Exercise, 13 to 14 Head Cleaning utility, 37 to 39 Help creative software, 62 EPSON, 61 to 62 High Quality Ink Jet Paper, 35 High Speed setting, 54 High-resolution images, 23, 57... - Page 70 19 to 22 system requirements, 5 USB, 5 Maintaining printer, 37 to 47 Matte Paper - Heavyweight, 31, 35 Media Pack, EPSON, 31 Media Type setting, 16, 21, 24, 26, 29, 35 MicroWeave setting, 54 Mirror images, 59 Monitor3, EPSON, 22...
- Page 71 53 miscellaneous, 59 paper feeding, 58 print quality, 55 to 57 printing, 54 setting up printer, 53 Progress Meter, 18 Project types, custom, 26 to 28 Quality/Speed setting, 17, 21 Reference Guide, 2, 9 to 11 Reinstalling software, 60...
-
Page 72: Fcc Compliance Statement
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Trade Name: EPSON Type of Product: Ink Jet Printer Model: P150B (EPSON Stylus COLOR 760) P150A (EPSON Stylus COLOR 860) FCC Compliance Statement For United States Users WARNING For Canadian Users... -
Page 73: Photo Quality Ink Jet Paper
EPSON Ink Jet Papers Use EPSON’s paper and inks to get the same photo quality results that have earned your printer all of its awards! EPSON’s papers are specially coated to work with EPSON’s quick drying inks. You’ll notice that when prints come out of your printer, you can immediately handle them. There is no drying time, no smearing or smudging, and your image is clean and smooth. -
Page 74: How To Order Epson Ink And Paper
How to Order EPSON Ink and Paper To order EPSON ink cartridges, paper, and other printing media, contact your dealer or call EPSON Accessories at (800) 873-7766 or visit our web site at www.epsonsupplies.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral.