Tools - Epson Stylus COLOR 760 Service Manual

EPSON Stylus COLOR 760
n
Never remove the ink cartridge from the carriage unless
this manual specifies to do so.
n
When transporting the printer after installing the ink
cartridge, be sure to pack the printer for transportation
without removing the ink cartridge.
n
Use only recommended tools for disassembling,
assembling or adjusting the printer.
n
Apply lubricants and adhesives as specified. (See Chapter
6 for details.)
n
Make the specified adjustments when you disassemble the
printer.
(See Chapter 5 for details.)
n
When assembling, if an ink cartridge is removed and needs
to be installed again, be sure to install a new ink cartridge
because of the following reasons;
n
Once the ink cartridge mounted on the printer is removed,
air comes in and creates bubbles in the cartridge. These
bubbles clog ink path and cause printing malfunction.
n
If an ink cartridge in use is removed and is reinstalled, ink
quantity will not be detected correctly since the counter to
check ink consumption is cleared.
n
Because of the reasons above, make sure to return the
printer to the user with a new ink cartridge installed.
Disassembly and Assembly

4.1.2 Tools

Table 4-1 lists the tools recommended for disassembling, assembling, or
adjusting the printer. Use only tools that meet these specifications.
Tools
(+) Driver No.2
(+) Driver No.1
Tweezers
Hexagon Box Driver
(Opposite side:5.5mm)
Overview
Table 4-1. Tool List
Commercially
Code
Available
O.K. B743800200
O.K. B743800100
O.K. B741000100
O.K. B741700100
Revision C
74