EPSON Stylus COLOR 760
4.2.4.6.1 Disassembling the CR Assembly
1. Remove the Printhead Unit. (Refer to Section 4.2.4.1)
2) Remove the No. 9 screw securing the I/C Detector Holder Bushing.
and remove the I/C Detector Cables which is placed in the gutter of the left
side of the CR assembly. Refer to Figure 4-42.
Figure 4-42. Removing the I/C Detector Holder Bushing
3) Remove the I/C Detector Holder by releasing the four hooks.
Refer to Figure 4-43.
Disassembly and Assembly
I/C Detector Holder Bushing
No. 9 Screw
Disassembly Procedures
Hooks for the
I/C Detector Holder
Figure 4-43. Removing the I/C Detector Holder
4) Remove the I/C Detector from the CR assembly.
Figure 4-44. Removing the I/C Detector
Revision C
CR Assembly
I/C Detector Holder
I/C Detector
101