2.
General and Transport Packaging
The items that are supplied depend on your order.
Before setup, please check that all the required components are
present.
The description is valid for the special sewing machine whose
individual components are delivered directly and completely from
Dürkopp Adler AG.
1 Machine head
–
Dürkopp Adler accessory with:
2 Reel stand
–
Protective cover (not shown)
Electric parts set, depending on your order, for:
Machines with direct drive
3 Protective belt cover
–
11 DA control unit
–
12 Operating panel
–
13 Knee switch
–
Machines with clutch motor (FIR)
3 Protective belt cover
–
5 Main switch
–
6 Sewing drive
–
9 Knee lever
–
Optional equipment
4 Table plate (optional)
–
7 Stand (optional)
–
8 Pedal and rods (optional)
–
10 Drawer (optional)
–
14 Maintenance unit (optional)
–
CAUTION !
The special sewing machine may only be set up by trained personnel.
Transport packing
After purchasing a mounted sewing machine, you must remove the
following packaging:
–
Safety straps and battens from the upper machine head, table and
stand.
–
Safety blocks and straps from the sewing drive.
GB
5