Table of Contents
Advertisement
4.2
Winding the Underthread
4.3
Inserting the Bobbin
10
–
Place the yarn spool on the yarn stand.
–
Thread the underthread as shown in the illustration.
–
Place the bobbin on winder 1.
–
Wind the underthread clockwise approx. 5 times around the bobbin
core.
–
Swing winder lever 2 to the bobbin and let catch.
–
The bobbin is filled during sewing.
The bobbin can also be filled outside the sewing sequence (see
Chapter Bobbin Change)
–
Winder lever 2 ends the winding procedure as soon as the bobbin
is filled.
–
After the winding, tear off the underthread at thread clamp 3.
Caution Risk of Injury !
Turn off switch 1 for the sewing machine head!
The bobbin can only be changed with the machine head turned off!
Removing the empty bobbin.
–
Flip bracket 5 up and remove the bobbin case top with bobbin.
–
Remove the empty bobbin from the bobbin case top.
3
1
2
Advertisement
Table of Contents
