Winding On The Hook Thread - Duerkopp Adler 868 Instruction Manual

6.7

Winding on the hook thread

5 4 3 2
–
Put the thread reel on the thread stand and conduct the needle
thread through the unwinder arm.
–
Conduct the thread through the thread guide 5, around the
tensioner 4 and through the thread guide 3.
–
Place the thread behind the blade 6 and sever it (in the arrow
direction).
–
Fit the bobbin 1 onto the bobbin winder.
There is no need to wind the thread onto the bobbin by hand.
–
Press the bobbin-winder lever 2 into the bobbin.
–
Sewing
The bobbin-winder lever terminates the process as soon as the
bobbin is full.
The bobbin winder always stops in such a position that the blade 6
is in the insertion position (see right-hand illustration).
–
Remove the full bobbin 1, place the thread behind the blade 6 and
sever it (in the arrow direction).
–
Fit empty bobbin onto the bobbin winder for the next winding
process and press the bobbin-winder lever 2 into the bobbin.
Caution Danger of breakage!
If the thread is not to be wound on during sewing, it is essential
for the sewing foot to be locked in the raised position and to set the
sewing-foot stroke to its smallest value.
1
2 6
21