Duerkopp Adler 841-27 Operating Instructions Manual page 21

2. New feed
–
Select the symbol at the left with the arrow keys " " and " ".
–
Strike the enter key.
The advancing device swings to the back.
The indicator at the left appears.
–
Strike the enter key or start key.
The clamping rail opens.
–
Remove the material.
–
Turn off the switch for the sewing machine head.
–
Rethread the needle thread.
–
Turn on the switch for the sewing machine head.
–
Select the the buttonhole at which the sewing procedure should
continue with the arrow keys " " and " ".
–
Strike the enter key.
The main menu appears in the display.
The thread breakage symbol appears at the bottom right in order
to indicate that the sewing unit is in the thread breakage mode.
–
To void the thread breakage mode strike key "3".
–
To continue sewing, feed the material again and strike the start key.
The sewing procedure is continued at the desired position.
3. Continuing sewing
–
Select the symbol at the left with the arrow keys " " and " ".
–
Strike the enter key.
The advancing device runs to the right and the clamping rail
swings.
–
Turn off the switch for the sewing machine head.
–
Rethread the needle thread.
–
Turn on the switch for the sewing machine head.
–
Select the buttonhole at which the sewing procedure should
continue with the arrow keys " " and " ".
–
Strike the enter key.
A symbol appears on the side.
Eventually adjust the material position.
–
Strike the enter key.
The sewing process will continue from the wished position.
1
23