Table of Contents
Advertisement
4.9
Replacing and Setting the Knife (Cutting Block)
3
1
2
Caution Risk of Injury !
Turn off the main switch!
The sewing arch must be in the base position otherwise the knife
strikes on the sewing arch!
4
Removing the knife
–
Loosen nut 1.
–
Pull out knife 2.
Attaching the knife
–
Screw in completely the knife depth stop
–
Insert a new knife (nut 1 loosened) and first push all the way up.
ATTENTION !
It is essential to take care that there is a clearance of 1 mm min.
between the needle thread shears and the lower edge of the knife.
Caution Risk of Injury !
When operating the keys on the controls do not reach into the area of
the knife for any reason.
–
Tighten the nut.
–
Turn on the switch for the machine head.
–
Turn on the main switch.
–
Press the F2 key when the Dürkopp Adler logo displays.
The menu for the machine-specific setting and test programs
appears.
–
Select the "Machine Head" function.
5
4
1
17
Advertisement
Table of Contents
