Table of Contents
Advertisement
6.2
Lubrication
1
Maintenance work
to be conducted
Hook lubrication
Check the oil level in reservoir 1.
Machine head lubrication
Check the oil level in reservoir 2.
Caution Risk of Injury !
Oil can cause skin rashes.
Avoid longer skin contact.
After contact wash yourself thoroughly.
ATTENTION !
The handling and disposal of mineral oils is subject
to legal constraints.
Deliver used oil to an authorized reception point !
Protect your environment.Take care not to spill any oil.
For lubrication use only ESSO SP-NK 10 lubricating oil or an
equivalent oil with following specification:
–
Viscosity at 40°C:
–
Flash point:
The oil is available from DÜRKOPP ADLER AG sales offices under the
following parts no.s:
–
2 liter container:
–
5 liter container:
2
Remarks
Tilt the machine head to the back.
Fill reservoir 1 through the filler opening up to the "max" mark
with oil.
The oil level should not drop below the "min" mark.
If necessary, fill oil through the drilled hole in the viewing
window up to the "max" mark.
2
10 mm
/s
150°C
9047 000013
9047 000014
1
Hours of
Operation
8
40
29
Advertisement
Table of Contents
