Table of Contents
Advertisement
Beisler Automated Sewing Equipment
D.3
D.3.3 Service menu level 1
Manual winding:
This function is used to wind thread from the thread spool
to the top thread spool. To start the function:
•
Press
key.
•
Press
key.
•
To exit, press any key.
NOTE - Remove top thread!
The top thread must be removed up to the thread lever
to protect the top thread and the bottom thread from being
entangled.
Selecting machine control inputs / outputs:
This menu is used for troubleshooting and for a manual
testing of machine operation settings.
The outputs (OUT) can be selected and tested separately.
The corresponding inputs (INP) are displayed for an ac-
tive output. Additionally, the selected output can be swit-
ched intermittently.
Activated inputs/outputs are marked with highlighted num-
bers.
01
02
03
04
05
11
12
13
14
15
21
22
23
24
25
31
32
33
34
35
41
42
43
44
45
51
52
53
54
55
NOTE - Machine movements!
If outputs are activated, the machine performs the cor-
responding functions. Before activating the outputs,
remove all unnecessary objects within the operating
range of the machine.
Programming
06
07
08
09
16
17
18
19
26
27
28
29
36
37
38
39
46
47
48
49
56
57
58
59
Short Seam Automat 2211-5 Working Instructions
Select output:
•
Press
•
Press
Select number line:
•
Press
Mark output number by moving the corresponding func-
tion number using the cursor. The cursor now has the
shape of an arrow.
•
Press
Activate output:
•
Press
The function number is highlighted in black. The output
is active.
Deactivate output:
•
Press
10
20
Switch output to intermittent operation:
30
•
Mark function number using cursor.
40
50
•
Press
60
The function number is highlighted in black and flashes.
The output is active intermittently.
Switch off intermittent operation of output:
•
Press
The function number is highlighted in black again. The out-
put is still active.
Deactivate output:
•
Press
- D 84 -
key.
key.
or
key.
or
key.
key.
key.
key for approx 3 seconds.
key.
key.
Advertisement
Chapters
Table of Contents
