How To Operate The Audio Control; Switching Audio Control Modes - Eclipse CD5030 Owner's Manual

Various Settings

How to operate the AUDIO CONTROL

Switching audio control modes

Various Settings
Various audio control modes may be fine-tuned using this procedure.
1
Press the [ENTER] button for less than one second.
The Audio Control mode will be activated.
2
Press the [ENTER] button to select an item to be adjusted.
The items change in the order shown below each time you press the button.
4 Speakers + Sub-Woofer Layout:
BALANCE → FADER → NON-F → LOUDNESS → SVC
*1: Setting cannot be made in FM mode.
3
Turn the [VOL] knob to adjust the volume.
Mode
Adjusts the audio balance of the right and left
BALANCE
speakers
Adjusts the audio balance of the front and rear
FADER
speakers
NON-F
(NON-FADER Adjusts non-fader level (for subwoofer).
LEVEL)
The loudness control may be turned on to
emphasize low and high frequencies at low
LOUDNESS volume levels.
Loudness boosts bass and treble at low
volumes.
SVC
Adjusts different volume levels for each audio
(Source Volume
mode.
Control)
62
Function
*1
→ VOL → BALANCE
Rotary Mode
Left
Emphasizes the left Emphasizes the right
speakers. speakers.
Emphasizes rear Emphasizes front
speakers. speakers.
Decrease the sub- Increase the sub-
woofer level. woofer level.
Select ON Select OFF
Decrease level. Increase level.
Right