How To Operate The Audio Control; Switching Audio Control Modes - Eclipse CD7200 MKII Owner's Manual

Various Settings

How to operate the AUDIO CONTROL

Switching audio control modes

Various Settings
Various audio control modes may be fine-tuned using this procedure. Refer to Speaker Layout Settings
for more information.
Press the [ENTER] button for less than one second to select the item to be
1
adjusted.
Modes will switch in the order shown below each time the button is pressed.
3-Way Speaker Layout:
BASS → MID → TREB → LOUDNESS → SVC
4 Speaker + Sub-Woofer Layout:
*2
→ FADER
BALANCE
*1: Setting cannot be made in FM mode.
*2: Cannot be set when the CSII is set to ON.
*3: NON-F (non-fader) Output is not affected by the settings of the BASS, MID and
TREB.
Mode
BASS Adjusts bass level.
MID
Adjusts middle level.
(MIDDLE)
TREB
Adjusts treble level.
(TREBLE)
SVC
Adjusts different volume levels for each audio
(Source Volume
mode.
Control)
Adjusts the audio balance of the front and rear
FADER
speakers
Adjusts the audio balance of the right and left
BALANCE
speakers
NON-F
(NON-FADER
Adjusts non-fader level (for subwoofer).
LEVEL)
The loudness control may be turned on to
emphasize low and high frequencies at low
LOUDNESS
volume levels.
Loudness boosts bass and treble at low volumes.
64
*2 *3
→ NON-F → LOUDNESS
Function
*1
→ VOL→ BASS
*2 *1
→ SVC → VOL→ BALANCE
Rotary Mode
Left
Decrease level.
Decrease level.
Decrease level.
Decrease level.
Emphasizes rear
speakers.
Emphasizes the left
speakers.
Decrease the sub-
woofer level.
Select OFF
*2
Right
Increase level.
Increase level.
Increase level.
Increase level.
Emphasizes front
speakers.
Emphasizes the
right speakers.
Increase the sub-
woofer level.
Select ON