What Is Bluetooth; Bluetooth Audio Setup; Displaying The Bt Audio Set Selection Mode; Switching The Bluetooth Audio Mode On And Off - Eclipse CD5030 Owner's Manual

Operation

What is Bluetooth?

Bluetooth is a form of short-range wireless
communication technology used to connect cell
phones and personal computers.
This technology enables hands-free calling and
data transmission between Bluetooth-compatible
devices.
Bluetooth is a registered trademark of Bluetooth
SIG, Inc.
WARNING
1 2
For safety reasons, the driver must not
operate the portable device while driving.
Stop the vehicle in a safe location before
operating the device.
CAUTION
1 2
• Do not leave the portable device
inside a vehicle. (The temperature
inside a vehicle may increase
dramatically when it is exposed to
extreme heat from the sun.)
• Do not use the portable device in a
location close to the main unit. If they
are too close together, the sound
quality and the connection may be
adversely effected.

Bluetooth audio setup

A variety of functions available when using the
portable device can be set from the BT Audio Set
mode.
• BT Audio setting:
Bluetooth audio mode on and off.
• Connection setting:
Main unit and portable device connectivity.
• Disconnection setting:
Disconnects the main unit and the portable
device.
36
• Device INFO display:
Displays device information for the main unit.
Displaying the BT Audio Set
selection mode
Press the [ /MENU] button for
1
more than one second.
The MENU
displayed.
Select the "FUNC" by pressing the
2
[ ] or [ ] button.
Press the [ENTER] button.
3
Select "BT Audio Setting" by
4
pressing the [ ] or [ ] button.
Press the [ENTER] button.
5
The BT Audio Setting selection mode
is activated.
Switching the Bluetooth audio mode
on and off
The Bluetooth audio function can be selected
while in the audio mode.
Press the [ /MENU] button for
1
more than one second.
The MENU
displayed.
Select the "FUNC" by pressing the
2
[ ] or [ ] button.
Press the [ENTER] button.
3
Select "BT Audio ON/OFF" by
4
pressing the [ ] or [ ] button.
Press the [ENTER] button.
5
selection mode
selection mode
is
is