Category Selection; Direct Channel Selection; Manually Storing Channels Into Memory; Preset Channel Scan - Eclipse CD5030 Owner's Manual

How to operate the tuner with an optional XM satellite radio tuner connected (U.S.A./CANADA only)

Category selection

The channel can be selected from among
categories such as ROCK and DANCE.
Consult the XM website for the details of the
categories.
Hold down the [<] or [>] button
1
for less than one second.
Each time the button is pressed, the
category changes.
[>]:
Advances to the next category.
[<]:
Returns to the previous category.

Direct channel selection

The channel can be selected by inputting the
channel directly.
Press the [MODE/TAG] button for
1
more than one second.
The mode will change to the direct
channel selection mode.
Select the channel number by
2
pressing the [<] or [>] button.
[>]:
Advances to the next number.
[<]:
Returns to the previous number.
Select channel number to be input
3
by pressing the [ ] or [ ] button.
Each time the button is pressed, the
channel number
following order.
0 ↔ 1 ↔ 2 ↔ 3 ↔ 4 ↔ 5 ↔ 6 ↔ 7 ↔
8 ↔ 9 ↔ 0 ↔
4
Press the [ENTER] button.
Reception starts.
changes in the
Manually storing channels into
memory
This section covers the storing of channels in the
numbered buttons in memory.
Select the channel to be stored by
1
pressing the [ ] or [ ] button.
Select any button, from [1] to [6],
2
and press it for more than two
seconds.
The tuned channel is now memorized
and stored in the button selected.
Repeat the procedure to manually
store the tuned channels into memory,
in turn, for buttons [1] to [6]. These
buttons are called the preset buttons.
ATTENTION
If the vehicle's battery is disconnected (for
repairs to the vehicle or when removing the
main unit), all channels stored in memory will
be lost. In such cases, store the channels in
memory again.

Preset channel scan

This function enables the reception of all the
channels in the preset buttons for five seconds
each.
Hold down the [ ] button for more
1
than one second.
"P SCAN" will appear on the display,
and channels stored in preset buttons
[1] through [6] will be received for five
seconds each.
To stop the preset scan mode at
2
the desired channel, press the [ ]
button again.
The main unit will stay tuned to the
desired channel.
XVII
93