Changing Illumination Color; Changing Display Type (Disp Type); Changing Background (Background); Changing Spectrum Analyzer (S/A) - Eclipse CD5030 Owner's Manual

Various Settings

Changing illumination color

You can change the button illumination color in
the following way.
Select "Illumination" by pressing
1
the [ ] or [ ] button.
2
Press the [ENTER] button.
The illumination
activated.
3
Press the [ ] or [ ] button.
Pressing the [ ] or [ ] button changes
the illumination color as follows. The
selected settings will take effect.
Blue ↔ Red
Changing display type
(DISP Type)
You can change the display type (Background or
Spectrum analyzer).
Select "DISP Type" by pressing the
1
[ ] or [ ] button.
2
Press the [ENTER] button.
The display type setting mode is
activated.
Select a setting item by pressing
3
the [ ] or [ ] button.
When the button is pressed, the
setting item changes in the following
order.
Background ↔ S/A
4
Press the [ENTER] button.
Switches among
modes.
76
setting mode is
the adjustments
Changing Background
(Background)
Select "Background" by pressing
1
the [ ] or [ ] button.
2
Press the [ENTER] button.
The background setting mode is
activated.
Select a setting item by pressing
3
the [ ] or [ ] button.
When the button is pressed, the
background changes in the following
order.
Motion picture 1 ↔ Motion picture 2
4
Press the [ENTER] button.
The selected settings will take effect.
Changing spectrum analyzer (S/
A)
You can change the spectrum analyzer type.
Select "S/A" by pressing the [ ] or
1
[ ] button.
2
Press the [ENTER] button.
The spectrum analyzer type setting
mode is activated.
Select a setting item by pressing
3
the [ ] or [ ] button.
When the button is pressed, the
analyzer type changes in the following
order.
Type 1 ↔ Type 2
4
Press the [ENTER] button.
The selected settings will take effect.