Switching The Sound Adjustment Mode; Parametric Equalizer Adjustment (Peq) - Eclipse CD5030 Owner's Manual

Various Settings
Switching the sound adjustment
mode
Press the [ /MENU] button for
1
more than one second.
The Menu Selection mode will be
activated.
Select "SOUND" by pressing the
2
[ ] or [ ] button.
3
Press the [ENTER] button.
The Sound Selection mode will be
activated.
Select a setting item by pressing
4
the [ ] or [ ] button.
Each time the button is pressed, the
setting item changes.
Parametric EQ (Auto EQ) ↔ Time
Alignment (Auto TA) ↔ X-Over ↔
Position Selector ↔ Multi Harmonizer
↔ Non-fader Setting ↔ Parametric EQ
5
Press the [ENTER] button.
This changes to each setting mode.
68
Parametric equalizer adjustment
(PEQ)
You can adjust the 7-band parametric equalizer.
Each band can be set to the following median
frequencies:
Band Adjustable frequency (Hz)
1 63, 80, 100
2 125, 160, 200
3 250, 315, 400, 500
4 630, 800, 1 k, 1.25 k
5 1.6 k, 2 k, 2.5 k, 3.15 k
6 4 k, 5 k, 6.3 k, 8 k
7 10 k, 12.5 k, 16 k
The default for each band is as follows.
Band
1 80
2 160
3 400
4 1 k
5 2.5 k
6 6.3 k
7 12.5 k
ATTENTION
It is not possible to set more than one band in
the same channel and median frequency.
Either change the median frequency of the
current band, or change the median frequency
of another band.
Default value (Hz)