Canon IR3320i Copying Manual page 68

3
Press [X] and enter its value. Press [Y] and enter its value. Then, press [OK].
You can also enter values using
If you enter the ratio with
1
Place the original on the platen glass if the zoom ratio is more than 400%.
The display returns to the Basic Features screen, and the selected copy ratio is displayed.
If you enter a value outside the setting range, a message prompting you to enter the appropriate value
appears on the screen.
IMPORTANT
• Select a paper size other than [Auto] when setting [Auto XY Zoom]. If you select [Auto], the copy ratio is automatically
set to the size of the paper in paper drawer 1.
NOTE
• If you make a mistake when entering values, press [C] on the touch panel display, and enter the correct values.
• When you select [Auto XY Zoom], <X: Auto%> and <Y: Auto%> will be displayed as the copy ratios on the Basic
Features screen, in the following cases:
- An original is placed in the feeder.
- An original whose size cannot be detected is placed on the platen glass.
1-58 Changing the Copy Ratio (Copy Ratio)
- (numeric keys).
- (numeric keys), you can change the entered value by pressing [–] or [+].