Canon IR3320i Copying Manual page 148

NOTE
• If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the Additional Functions
beforehand. (See Chapter 3, "Selecting and Storing Settings to Suit Your Needs," in the Reference Guide.)
• The default setting is '18 mm' for the binding erase width. The Maximum binding erase width area is '20 mm.'
4
Press
Copying starts.
NOTE
• To cancel this setting, press [Special Features]
• To cancel all settings and return the machine to the Standard mode, press
2
2-38 Erasing Shadows and Frame Lines from Copies (Frame Erase)
.
[Frame Erase] [Cancel] in this order.
.