Setting The Job Duration Display - Canon IR3320i Copying Manual

Setting the Job Duration Display

When the Job Duration Display is set to 'On,' the time remaining until completion of the copy job
(Job Duration Time) is indicated in minutes on the touch panel display. (The job duration time is
not displayed for some copy modes.)
NOTE
• The job duration time is shown as the <Print Time> on the screen displayed during printing.
• The job duration time is not displayed for the Remote or Cascade Copy, Transparency Interleaving, Cover/Sheet
Insertion, Different Size Originals, Rotate Collating, and Rotate Grouping modes, or when the copy waiting time is
less than one minute.
• The default setting is 'Off.'
1
Call up the desired screen as follows:
[Copy Settings]
2
Select [On] or [Off], and press [OK].
The specified mode is set.
3
Press [Done] repeatedly until the Basic Features screen appears.
[Job Duration Display]

Setting the Job Duration Display

3
3-7