Setting The Remote Device Transmission Timeout - Canon IR3320i Copying Manual

Setting the Remote Device Transmission
Timeout
A remote copy job is cancelled if there is no response from the remote copy printer within a
given time. Select a timeout setting from 5 to 30 seconds in 1-second increments.
NOTE
• Jobs that reach the timeout limit (without arriving at the remote copy printer) are deleted.
• The default timeout setting is '30 seconds.'
1
Call up the desired screen as follows:
[Copy Settings]
2
Use [–] and [+] to set the Remote Device Transmission Timeout, and press [OK].
You can also enter values using
The specified mode is set.
3
Press [Done] repeatedly until the Basic Features screen appears.
[ ] [Remote Device Transmission Timeout]
- (numeric keys).

Setting the Remote Device Transmission Timeout

3
3-19