Dolby B Nr (Noise Reduction); Repeat Play; Blank Skip (B.skip); Fast Forward And Rewind - Alpine CDM-7870R Owner's Manual

Dolby B NR (Noise Reduction)

1
After inserting a Dolby B NR encoded tape,
press the NR B button.
The display shows the "B NR" The tape noise is
reduced in the Dolby NR mode when a Dolby B
NR encoded tape is played.
Press the NR B button to cancel the Dolby NR
mode.

Repeat Play

1
Press the REPEAT button to play back
repeatedly the current programme being played.
The RPT indicator appears and the programme
will be played repeatedly.
Press the REPEAT button to stop the repeat
play. The RPT indicator disappears.

Blank Skip (B.SKIP)

1
Press the B.SKIP button during tape play to skip
over blank portions of the tape lasting 15
seconds or longer, "B.SKIP" appears on the
display.
Press the B.SKIP button to cancel the blank skip
mode. "B.SKIP" disappears from the display.

Fast Forward and Rewind

1
Press the g DN or f UP button during
tape play to fast rewind or forward the tape
respectively.
The tape side indicator (
or << moves indicating the direction of the tape.
When the end of the tape is reached in the
rewind mode, the player stops automatically and
begins playing from the beginning of the same
side. When the end of the tape is reached in the
fast forward mode, the player stops automatically
and begins playing from the beginning of the
opposite side.
2
Press the f UP button during forwarding to
stop fast forwarding and resume tape play.
Press the g DN button during rewinding to
stop rewinding and resume tape play.
The tape side indicator stops blinking.
or ) blinks and >>

Scanning Programmes

1
Press the SCAN button to play the first 10
seconds of each programme on the tape.
"SCAN" appears on the display.
Press the SCAN button to cancel the scanning
when the desired programme is found.
NOTE
The SCAN operation cannot detect blank sections of
less than 4 seconds.

Manual Reverse

1
Press the PROG button during tape play to
change the tape direction to play the other side
of the tape.
The tape side indicators (
show which side of the cassette is being played.
Programme Sensor (P.S.)
1
Press the P.S. DN button once during tape play
to return to the beginning of the current selection
being played.
If you wish to return to a selection further back,
press repeatedly until the number of selections
you would like to skip is shown in the display.
The display will show PS-1 with the first press
and will increase by one with each successive
press up to PS-9. The tape indicator will blink
showing the direction of your search.
Press the P.S. UP button once during tape play
to advance to the beginning of the next selection.
If you wish to advance to a selection further
ahead, press repeatedly until the number of
selections you would like to skip is shown in the
display.
The display will show PS+1 with the first press
and will increase with each successive press up
to PS+9. The tape indicator will blink showing the
direction of your search during searching
operation.
NOTES
The programme sensor feature is functional in the
tape play mode only.
You can advance to the 9th (max.) programme or
return to the 8th (max.) programme.
Cassette
FR
and ) change to
ES
DE
IT
SE
19
-EN