Selecting DHW Heating for a Few Hours Only
Party mode
ºF
68
The following functions enable you to heat DHW for several hours, without
permanently altering your control settings. For this, select "Party mode" "g".
During party mode, the DHW recirculation pump is active and central heating
operates with the party temperature. Set the party temperature to 39.2ºF / 4ºC, if
you require no central heating (e.g. in summer).
Press the following keys:
1. g
for "Party mode"; the value of
the party temperature flashes.
If "Select htg. circuit"; is
displayed and "1r" flashes:
H Select that heating circuit
with ⊕ / ⊝, to which the
adjustment should apply.
H Confirm twice with
H "g" again for "Party mode";
the party temperature flashes.
2. ⊕/⊝ for the required temperature, if
you want to change the room
temperature.
3.
to confirm; the temperature no
longer flashes and is saved.
4.
to exit the setting menu.
5. Ending party mode
H Party mode ends automatically with
the next changeover to central
heating with normal room
temperature, but no later than after
8 hours.
H If you want to terminate party
mode early, press "g" again.
If "Select htg. circuit" is displayed
and "1r" flashes:,
H Select that heating circuit with
⊕ / ⊝, to which the adjustment
should apply.
H Confirm twice with
H Press "g" again
Selecting DHW Heating
.
.
29