Adjusting the Room Temperature
Changing the Room Temperature for a Few Hours Only
Selecting party mode
Party mode
ºF
68
24
H Central heating will be enabled at any
temperature you select (party
temperature).
H The DHW will be boosted to the set
temperature.
H The DHW circulation pump is
switched ON (if installed).
Press the following keys:
1. g
for "Party mode"; the value of
the party temperature flashes.
If "Select htg. circuit"; is
displayed and "1r" flashes:
H Select the heating circuit
with ⊕ / ⊝, to which the
adjustment should apply.
H Confirm twice with
H "g" again for "Party mode";
the party temperature flashes.
2. ⊕/⊝ for the required temperature, if
you want to change the room
temperature.
3.
to confirm; the temperature no
longer flashes and is saved.
4.
to exit the setting menu.
5. Ending party mode
H Party mode ends automatically with
the next changeover to central heating
with normal room temperature, but
no later than after 8 hours.
H If you want to terminate party mode
early, press "g" again.
If "Select htg. circuit" is displayed
and "1r" flashes:,
- Select the heating circuit with ⊕ /
⊝, to which the adjustment should
apply.
- Confirm twice with
- Press "g" again.
(continued)
.
.