Changing The Room Temperature For A Few Hours Only; Selecting Energy Saving Mode - Viessmann Vitodens 200-W Operating Instructions Manual

Changing the Room Temperature for a Few Hours Only

The following functions enable you to
change your room temperature for
several hours, without permanently
altering your control settings.
H You want to leave your home and,
according to the time program, central
heating with normal room
temperature is currently selected. To
save energy, you can reduce the
normal room temperature with
"Energy saving mode" û .
H You want to heat spontaneously with
the normal room temperature and
provide DHW (e.g. when guests
unexpectedly stay longer in the
evening). For this, select "Party
mode" "g" (see page 24).

Selecting energy saving mode

Economy mode
In energy saving mode, the normal room temperature will be reduced automatically.
Energy saving mode ends automatically with the next change to central heating
with "Red. room temp.".
1. û for "Energy saving mode".
If "Select htg. circuit" is displayed
and "1r" flashes:,
- Select the heating circuit with
⊕ / ⊝, to which the adjustment
should apply.
- Confirm twice with
- "û" again for "Energy saving
mode".
2. Ending energy saving mode
If you want to terminate energy
saving mode early, press "û".
If "Select htg. circuit" is displayed
and "1r" flashes:,
- Select the heating circuit with ⊕ /
⊝, to which the adjustment should
apply.
- Confirm twice with
- Press "û" again.
Adjusting the Room Temperature
.
.
23