Selecting The Holiday Program - Viessmann Vitodens 200-W Operating Instructions Manual

Adjusting the Room Temperature
Setting a Permanent Room Temperature

Selecting the holiday program

The selected time program will be
enabled at the departure and return
days.
Departure date
Sa
19;02;05
Return date
We
23;02;05
22
(continued)
Press the following keys:
for "Holiday program".
1. j
Or..
for "Departure date" (the
2.
current date is displayed).
3. ⊕ for the date of the required
departure day.
4. to confirm; "Return date"(a
date following that of the
departure day) will be
displayed.
for the date of the required
5. ⊕
return day.
6. to confirm.
7. The room temperature during the
holiday program is the selected
reduced room temperature (see page
19).
If you want to change this
temperature:
H Press "tm".
If "Select htg. circuit" is displayed
and "1r" flashes:,
- Select the heating circuit with ⊕ /
⊝, to which the central heating
should apply.
- Confirm twice with
- Press "tm" again.
H Select the required value with ⊕/⊝.
H Press to confirm; the temperature
no longer flashes and is now saved.
Note:
After approximately 4 sec. "Departure
date" will be displayed. Press j again
if you want to terminate setting a
holiday program early.
Note:
This change generally applies to the
reduced room temperature and must be
modified again, if required, after the
holiday program ends.
Ending holiday program:
H The holiday program terminates
automatically on the day of return.
H Press j again if you want to
terminate the holiday program early
.
and confirm "Delete? Yes" with .