Selecting DHW heating for a few hours only
The following functions enable you to heat DHW for several hours, without
permanently altering your control settings. For this, select "Party mode". During
party mode, the DHW circulation pump runs and central heating operates at the party
mode temperature.
Press the following keys:
1. "MENU".
2. |/~ for selecting "Heating circuit
1" (HK1), "Heating circuit
2" (HK2) or "Common
circuit".
3. d
to confirm.
4. |/~ for "Party mode".
Party mode
20°C
Change
Note
Set the temperature for party
mode to 4 ºC, if you do not
require central heating (e.g.
in summer) (see chapter
"Setting party mode").
Terminating party mode
Party mode ends automatically with the next changeover to central heating with
standard room temperature, but no later than after 8 hours.
If you want to cancel party mode
prematurely, press the following keys:
1. "MENU".
Selecting DHW heating
5. d
twice to confirm.
2. |/~ for selecting "Heating circuit
1" (HK1), "Heating circuit
2" (HK2) or "Common
circuit".
33