Directed Electronics READY REMOTE 24927 Owner's Installation Manual page 85

To activate Panic Mode:
➤
Press and hold the
seconds
➤
The Horn/Siren output and light flash will activate for
45 seconds
To de-activate Panic Mode:
➤
Press and release the
➤
Arm or Disarm the alarm system
Zone Bypass Feature
The Zone Bypass feature temporarily bypasses alarm inputs that
trigger excessively when the system is armed while monitoring the
other inputs for triggers. This keeps constant triggers due to envi-
ronmental reasons from annoying the neighbors.
Protected entry bypass:
If the door, hood, brake or ignition inputs become activated
through three consecutive 30-second full trigger durations, it will
be bypassed until it has become inactive for more than 5 seconds.
Sensor bypass:
If one of the sensor inputs is triggered three times within 1 hour,
that input will be bypassed for 1 hour. If a trigger occurs on that
input while the bypass timer is active, the bypass timer will reset
to 1 hour.
You can Disarm and then Rearm the alarm to defeat the sensor
bypass at any time.
86
button on the transmitter for 6
button on the transmitter
© 2007 Directed Electronics