External Midi Equipment Sync System By The Slave Mode; Connection To External Equipment; Setup Of External Equipment; Setup Of The Recorder - Fostex D2424LV Reference Manual

External MIDI equipment sync system by the slave mode

Up to this point, synchronization with external MIDI equipment has been explained with the
recorder as the master and MIDI equipment as the slave but depending on the slave mode setting,
the MIDI equipment can be set as the master and the recorder as the slave.
<Note>
External MIDI equipment which can be used as the master is limited to those which can output MTC.
* Initialize the recorder.
* Confirm the program and sampling frequency.
* In the following, the explanation will be on the assumption that a computer (with sequence software) is
used.
<Slave>
24TRACK DIGITAL RECORDER
POWER
1/9/17 2/10/18 3/11/19
FOOT SW
ACCESS

• Connection to external equipment

Connect MIDI OUT of the computer (with MIDI interface) with MIDI IN of the recorder.
The computer sequence software complying to MMC/MTC must be activated.

• Setup of external equipment

Sequence software is setup as follows.
* Set for output of MTC.
* Set frame rate of the MTC to be output.
* Confirm start time of the tune.
Refer to Owners Manual of the respective equipment for details.
• Setup of the D2424LV
1. Set to same frame rate as the sequence software by the SETUP mode "MTC Frame rate setting."
Refer to page " 114 ", SETUP mode "MTC Frame rate setting" for operating procedure and details.
2. Set to the desired mode by the SETUP mode "MTC offset mode setting."
Refer to page " 116 ", SETUP mode "MTC offset mode setting" for operating procedure and details.
3. A random offset time can be set by the SETUP mode "MTC offset time setting."
Refer to page " 115 ", SETUP mode "MTC offset time setting" for operating procedure and details.
4. Press the [EXECUTE/YES] key holding down the [SHIFT] key, set the slave mode to "On."
Model D2424LV Reference Manual (MIDI Sync Function)
AUTO RTN
AUTO RTN
CLIPBOARD AUTO PUNCH
AUTO PLAY IN OUT START IN OUT
PREVIEW
CHARACTER
EDIT SETUP UNDO/REDO PREV
SHIFT TC READY TC GEN M.UNDO PREV TC
AUTO
REHEARSAL
24bit LOCATE VARI PITCH
PUNCH
96kHz
TAKE
OPTICAL
RECORD TRACK RECORD STOP PLAY REW
TRACK SHIFT
4/12/20 5/13/21 6/14/22 7/15/23 8/16/24
ENVELOPE ALL INPUT ALL READY
9-16 17-24 TRACK SHIFT CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
END PGM SEL EXIT/NO EXECUTE/YES
MIDI IN
EJECT CHASE
LOCATE MEMORY
NEXT DISP SEL STORE RECALL
NEXT TC TIME BASE SEL HOLD
P.EDIT
F FWD
85
<Master>
Computer with MMC/MTC
software
MIDI OUT