Modifying (Or Deleting) Stored Tempo Settings; Setting The Metronome Function - Fostex D2424LV Reference Manual

Model D2424LV Reference Manual (Changing the Initial Settings <SETUP mode>)
4
4
Tempo=120
3
4
Tempo=60

Modifying (or deleting) stored tempo settings

1.Repeat steps 1-3 described in the "Storing a tempo
value" section.
2.Turn the Jog dial to select bar/beat to edit or delete.
3.Turn the Shuttle dial so that the flashing cursor is
on the TEMPO number.
Setting the Metronome function ("Click ?" menu)
"Setting the Metronome function" menu allows you to determine whether or not the recorder outputs a metronome
sound from Real track (track 24) during playback or recording.
Turning the Metronome function on enables you to record your performance while playing the instrument
accompanying the metronome sound.
<Notes>
• The metronome sound is output from track 24 in the D2424LV.
• When the metronome function is switched ON, the metronome sound cannot be recorded on the output track
nor can the recorded sound be played back. However, in a D2424LV formatted in 96kHz/24bit (8 track) or
88.2kHz/24bit (8 track), as the metronome sound will be output from track 24, real tracks1-8 can all be used
for record/playback.

Setting the Metronome function

• Initial setting:
• Option:
* You can turn the function on and off for each
Program individually.
* The settings cannot be saved and loaded as part of
the song data.
* The settings are maintained after you turn off the
power to the recorder.
1.While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
2.Turn the Jog dial to select "Click ?" ("?" flashes.),
then press the [EXECUTE/YES] key.
The current setting ("Off" or "On") appears on the
display.
Pressing the [EXECUTE/YES] key lights up the flashing
"?" character steadily; the current setting flashes.
The initial setting is "Off" as shown below.
Tempo=90
Tempo=120
[Off]
[Off], or [On]
Time signature setting
001 bar 4/4
005 bar 3/4
4.Use the Jog dial to enter a new value.
Entering "- - -" deletes the data at the selected bar/beat.
5.Press the [EXECUTE/YES] key.
6.Press the [STOP] button or the [EXIT/NO] key
repeatedly to exit SETUP mode.
SETUP
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7
SETUP
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7
3.Turn the Jog dial to select "On" or "Off".
Selecting "On" will enable the output of the metronome
sound. Selecting "Off" (initial setting) will disable the
metronome output.
4.Press the [EXECUTE/YES] key.
The display shows the selection (On or Off), then returns
to the indication in step 2.
112
Tempo Map
Tempo setting
001 bar 1 = 120
003 bar 1 = 90
005 bar 3 = 60
007 bar 2 = 120
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Flashing
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
OL
BIT 24
0
3
FS
6
9
kHz
12
18 CLOCK
24
INT
30
42
OL
24
BIT
0
3
FS
6
9
kHz
12
CLOCK
18
24
INT
30
42