Managing Songs By Program Change Function - Fostex D2424LV Reference Manual

Model D2424LV Reference Manual (Before Starting)
The recorder feature a Program Select function, which enables you to set up to 99 Programs on the
disk. When you format a disk, one Program is automatically created on the disk. You may create
more Programs, if necessary. You may also delete unnecessary Programs.
The recorder also features Program Change function, which enables you to select one of the Programs
set on the disk. Programs on the disk are something like independent containers. You can record,
play, and edit each container without affecting other containers. You can also name Programs,
which is useful for managing songs.
Additionally, as the sampling frequency can be changed individually for each program that is
generated, programs with different FS can be contained in one current drive.
NOTE: The ability to change the FS is limited by the quantizing figure used at formatting.
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5
• Refer to page " 37 " for more information on
the program select function.
• Refer to page " 36 " for more information on
the duplicating a program.
• Refer to page " 37 " for more information on
the program delete function.
• Refer to page " 38 " for more information on
the editing a program title.
• In regards to the "Chain Play?" menu in the
SETUP mode, see page " 58 ".
• Refer to page " 39 " for "Changing the
program FS."

Managing songs by Program Change function

program 1
program 4
program 7
You can set up to 99 programs (independent containers).
6 7 8 9 10 11 12 13 14 15 16 17
program 2
program 5
program 8
ABS
M S
PGM
OL
BIT
0
3
6
9
12
18
24
30
42
18 19 20 21 22 23 24
26
program 3
program 6
program 9
This is the Program indication
when using an E-IDE hard disk as
the current drive ([PGM] will
24
appear before the program
FS
number such as [P01] shown in
kHz
the example below).
CLOCK
INT
<Notes>
• Total available recording time is always
the maximum available recording time on
the disk, regardless of the number of
Programs you set on the disk. That is, if
you use up the maximum recording time
for one Program, you will not be able to
record any data in other Programs.
• As described in the " REMAIN indicator ,"
creating additional Programs will consume
a small amount of disk space.
•
Such operations as program compilation
and selecting, functions only when the
" Chain Play? " menu in the SETUP mode, is
" Off. "