Executing Of Recording; Mtc Sync/Midi Machine Control System - Fostex D2424LV Reference Manual

* If correct sync cannot be obtained, re-check the connections/cables and setting of both equipment.
<Note>
In the recorder, the " ABS 0 " position is set at " -002BAR/1BEAT /00CLK ."
This setting is made in consideration of the time required (it will not sync immediately) for the MIDI sequencer,
etc. to enter into sync. As a result, if the recorder is played back from ABS 0 (LOCATE ABS 0), sync will be
completed by the time it reaches the first bar, and will thus synchronize from head of the tune.
• Execution of recording
Various ways of recording can be conducted while synchronizing the recorder and the MIDI
sequencer with the MIDI clock.
The following will explain synchronization by the MTC (MIDI time code) output and the computer
controlling system using MMC (MIDI machine control). In this system, the recorder will be the
master and the computer (with sequence software) will be the slave. The recorder will attach
any desired offset (time difference) against ABS time (absolute time) and output it as MTC in any
desired frame rate. It can also carry out the proper operation upon receiving an MMC and
Fostex System Exclusive Message from outside. In this case, because the recorder can setup a
DEVICE ID number by the SETUP mode "MIDI Device ID Setting" menu, a multiple number of the
unit's can be separately controlled by changing the DEVICE ID numbers in the transmitted message
from the computer. In regards to the corresponding content for MMC, refer to the "MMC list" on
page "134" and on the Fostex System Exclusive Message, the "Fostex Exclusive List" on page "135."
* Set the recorder in the initial state.
* Confirm the program and sampling frequency.
POWER
FOOT SW
SETUP
SYSTEM MIDI
CURRENT SCENE STATUS
KEY MODE
ROUTING/ PAIR/
PHASE GROUP
MMC SEND
CHANNEL/
CH VIEW METER
FADER MODE
AUX1 AUX2
AUX3 AUX4
ADD.AUX
EFF1 EFF2
CHANNEL
ANALOG IN ANALOG IN
ADAT IN
EFF RTN
Model D2424LV Reference Manual (MIDI Sync Function)

MTC sync/MIDI machine control system

AUTO RTN
CLIPBOARD
AUTO PLAY START
IN OUT
24TRACK DIGITAL RECORDER
EDIT SETUP
SHIFT TC READY TC GEN
AUTO
24bit REHEARSAL
PUNCH
96kHz
TAKE
OPTICAL
RECORD STOP PLAY
RECORD TRACK
TRACK SHIFT
1/9/17 2/10/18 3/11/19 4/12/20 5/13/21 6/14/22 7/15/23 8/16/24
ENVELOPE ALL INPUT ALL READY
ACCESS 9-16 17-24 TRACK SHIFT CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
METER
OL
-3
-6
-9
-12
-18
-24
-36
-40
L R
ST BUSS/SOLO
PAGE SELECT
1-8 ANALOG IN 9-16 ADAT IN 17-20 EFF RTN
EQ/LO EQ/HI-MID
EQ/LO-MID EQ/HI-MID
GAIN GAIN GAIN GAIN
FREQ Q FREQ Q FREQ Q FREQ Q
PAN PAN PAN PAN PAN PAN PAN PAN
EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT
SOLO SOLO SOLO SOLO SOLO SOLO SOLO SOLO
ON ON ON ON ON ON ON ON
+10 +10 +10 +10 +10 +10 +10 +10
0 0 0 0 0 0 0 0
-10 -10 -10 -10 -10 -10 -10 -10
-20 -20 -20 -20 -20 -20 -20 -20
-30 -30 -30 -30 -30 -30 -30 -30
-40 -40 -40 -40 -40 -40 -40 -40
- - - - -
- - -
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20
MIDI sound sources
AUTO RTN
AUTO PUNCH
PGM SEL EXIT/NO EXECUTE/YES
IN OUT END
MIDI IN
PREVIEW EJECT CHASE
CHARACTER
LOCATE MEMORY
UNDO/REDO PREV NEXT DISP SEL STORE RECALL
M.UNDO PREV TC NEXT TC TIME BASE SEL HOLD
LOCATE VARI PITCH
P.EDIT
MIDI OUT
REW F FWD
Master Recorder
SELECTED EQ EFF EDIT
EQ ON EFF 1 EFF 2
EQ LIBRARY EFF LIBRARY
RECALL STORE RECALL STORE
REC BUSS SCENE MEMORY
SOLO RECALL STORE
SOLO
ON
/-1 +1/
EXIT
DATA
0
-10
-20
-30
ENTER
-40
-60
-
MASTER
MIDI IN
79
MMC or Fostex System Exclusive Message
MIDI IN MIDI OUT
Computer System
with
MMC/MTC software
MIDI OUT