Creating A New Program.25 - Fostex FD-8 Quick Operation Manual

Digital muititracker

Hide thumbs Also See for FD-8:

Table of Contents

FDSteX

Creating a new program

The previous explanation of how to record and play data on the FD-8 is based on using one program on the

disk. However, you can set up multiple programs (up to 99) on the disk as described in the Owner's Manual,

and record and play individual programs. This section describes how to create a new program on the disk.

Note:

Although you can create up to 99 programs on the disk, the available total recording time is not affected by the

number of programs. For example, if you use all available recording time for one program, you will be unable to record

in another program. Also, additional programs do require a very small amount of disk space.

1. While the FD-8 is stopped, press and hold down the HOLD/> key and press the STORE key.

The FD-8 enters program select mode, and displays [Select PGM] momentarily, then the following

indication. This means that program 1 is currently selected and the FD-8 is ready to create a new

program.([01] and [SURE?] flash.)

2. Turn the JOG dial clockwise to select [New PGM ?] ("?" flashes).

[SURE ?] flashes.

If only one program has been set up, moving the JOG dial immediately causes [New PGM ?] to appear.

Flash

Table of Contents