Checking The Valve Clearance - PEUGEOT Tweet Workshop Manual

50 cc
- Using the set of feeler gauges, measure the clearance of each valve.
Clearances:
±0.02
• 0.05 mm at the intake.
0.02
• 0.10 mm at the exhaust.
- If the clearance is not correct, adjust by means
of the cam follower screw.
- Use a wrench to adjust the valve clearance:
Type: Marolotest, P/N 500140.

Checking the valve clearance

- At the intake a 0.10 mm feeler gauge
shouldn't go.
- At the exhaust a 0.15 mm feeler gauge
shouldn't go.
- On the contrary, if the fealer gauge goes,
reset the clearances.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
125/151 cc
Clearances:
±0.02
• 0.12 mm at the intake.
±0.02
• 0.12 mm at the exhaust.
- At the intake a 0.15 mm feeler gauge
shouldn't go.
- At the exhaust a 0.15 mm feeler gauge
shouldn't go.
- On the contrary, if the fealer gauge goes,
reset the clearances.
SERVICE OPERATIONS
33