PEUGEOT Tweet Workshop Manual page 37

- Remove the2 pins (1).
- Remove the brake pads (2).
When refitting the brake pads, push the
pistons all the way into their housing.
After refitting, actuate the brake levers
several times to bring the brake pads
against the brake disc.
Rear brake 125/151 cc
- Remove the plastic cover (1).
- Remove the brake pad stop pin (2).
- Remove the brake pads.
When refitting the brake pads, push the
pistons all the way into their housing.
After refitting, actuate the brake levers
several times to bring the brake pads
against the brake disc.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
SERVICE OPERATIONS
2
1
2
35