Transporting The Printer; Preparation For Transportation - Canon BJC-3000 Service Manual

BJC-3000

4. TRANSPORTING THE PRINTER

To prevent ink leakage and defective printing due to dried nozzles, keep the BJ cartridge
(with ink tanks installed) stored in the BJ cartridge container when carrying or
transporting the printer.
Fix the carriage in the cartridge replacement position with tape for transportation.

4.1 Preparation for Transportation

Prepare for transportation by following the instructions described below:
1) Open the front cover while the power is turned on. The carriage will move to the
cartridge replacement position.
2) Remove the cartridge from the carriage and put it in the container.
3) Turn off the printer by pressing the POWER button.
4) Disconnect the interface cable.
5) Remove the AC power plug from the outlet.
6) Fix the carriage in the cartridge replacement position with tapes.
Fix the cartridge lock lever with tapes as well.
7) Close the front cover.
8) Pack the printer in its' original packaging. If the original packaging is not available,
pack the printer in sufficient shock-absorbing material.
Figure 2-20 Transporting the Printer
2-19
Part 2: Maintenance