Reattaching And Removing The Upper Cover Unit; Removing The Printer Unit - Canon BJC-3000 Service Manual

Part 2: Maintenance

2.3.3 Reattaching and removing the upper cover unit

Procedures to reattach the upper cover unit are shown below:
1) Assemble the back part of the upper cover unit.
2) Assemble the claw on the front side.
To remove the cover, follow the procedures in reverse order.
Figure 2-7 Reattaching and Removing the Upper Cover Unit

2.3.4 Removing the printer unit

Procedures to remove the printer unit are shown below:
1) Remove the screws which fasten the printer unit to the bottom case.
2) Release the 2 claws on the bottom case on the back side of the printer unit (Arrows
1 and 2).
3) Holding the handles on both sides of the printer, shift and raise the printer unit as
by Arrow 3.
2
3
Figure 2-8 Removing the Printer Unit
2-8
1
Screw
3
1
2
BJC-3000