Disassembly/Reassembly; List Of Tools - Canon BJC-3000 Service Manual

Part 2: Maintenance

2. DISASSEMBLY/REASSEMBLY

2.1 List of Tools

Tools required for disassembly/reassembly are shown below:
Ordinary Tools
Phillips screwdriver
Blade screwdriver
Long-nose pliers
Tweezers
Flat brush
Multi-meter
Special Tools (Parts Number)
Gap gauge 2.3mm (QY9-0054-000) For adjusting the head gap (see Page 2-10 Figure 2-
Tension spring (QY9-0043-000)
Grease MOLYKOTE PG-641 (CK-0562-000) For application to the specified place (see Page 2-11
Use
For installing and removing screws
For removing plastic parts
For installing and removing coil springs
For installing and removing flexible cables
For applying grease
For troubleshooting
Use
12 ). Qty: 1
For adjusting the carriage belt tension
(see Page 2-14 Figure 2-15 )
Figure 2-13 )
2-2
BJC-3000