Installation; Installation Location; Setup Procedures; Connecting The Interface Cable - Canon BJC-3000 Service Manual

Part 1: Product Specifications

4. INSTALLATION

Refer to the User's Manual for detailed installation procedures.

4.1 Installation Location

Allow enough space for the printer to be used with ease.
Refer to the diagram below for the printer's external dimensions for installation.
Approx. 418 mm

4.2 Setup Procedures

In order to prevent the potential difference between the computer and the printer,
interface cables should be connected prior to connecting the AC power plug to the AC
outlet.

4.2.1 Connecting the interface cable

1) Make sure that both the printer and the computer are turned off.
2) Connect the interface cable to the interface connector on the printer, and lock in
place with the connector clips.
3) Connect the other end of the interface cable to a computer and secure in place.

4.2.2 Connecting the power

1) Connect the AC power plug to the AC outlet.
2) Press the POWER button on the printer to turn it on. Initialization will be carried
out while the indicator blinks in green. After initialization is completed, the
indicator lights in green. When a cartridge is not installed in the printer, the
indicator blinks six times in orange and once in green, repeatedly. Also, the
carriage will move to the cartridge replacement position.
Figure 1-5 Installation Space
1-10
Approx. 243 mm
Approx. 480mm
BJC-3000