Removing The Pressure Roller Unit; Position Of Spurs In The Spur Base Unit - Canon BJC-3000 Service Manual

BJC-3000

2.3.5 Removing the pressure roller unit

To remove the pressure-roller unit, release the three claws in the order shown in the
figure, and pull to the back side of the printer unit and remove.
Claws can be undone with ease when removed from the left side of the printer.

2.3.6 Position of spurs in the spur base unit

The positions of spurs on the spur base unit are shown below (seen from the bottom,
from which the spurs will be re-installed).
Re-install the spurs in the correct position if they are accidentally dislocated.
Figure 2-10 Position of Spurs in the Spur Base Unit (Bottom View)
Figure 2-9 Removing the Pressure Roller Unit
Position of spurs
Position of spurs
2-9
Part 2: Maintenance