2 ] Removing The Chassis Assy - Brother P-touch BB4 Service Manual

[ 2 ] Removing the Chassis ASSY
(1) Remove the two screws from the bottom cover.
(2) Slightly open the bottom cover, discharge capacitor C5 with a screwdriver or the like,
and then disconnect the head flat cable from the main PCB, as illustrated below.
NOTE: Take care not to bend the head flat cable.
Figure 2.2-4 Discharging Capacitor C5 and Disconnecting the Head Flat Cable
Figure 2.2-3 Unscrewing the Bottom Cover
II - 8