Other Useful Transmission Settings - Olivetti Fax-Lab 220 Instructions Manual

T
O CHANGE THE REMOTE CONTROL CODE
If the fax machine is connected to an extension that oper-
ates in tone dialling mode and is set up for manual
reception, whenever there is a call from a correspondent
wishing to send you a document, you can set it to receive
the document by typing the code
operation has the same effect as pressing the
on the fax machine.
You can replace the second "asterisk" of this code using
digits from 0 to 9.
If the fax machine (model without built-in TAD) is con-
nected to an external answering machine, we recom-
mend you choose a different digit from the one used to
control the machine from a remote location.
Until the display shows:
The display shows:
The display shows the line to which the fax machine was set
to be connected, for example:
Until the display shows:
The display shows the code you set previously, for ex-
ample:
- Type the new code, for example: "*9".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
N O T E
If you want to disable this function, after the fourth step, press
the |/} keys to display: "REMOTE START:OFF", then press
the key to confirm and the
fax machine to the initial stand-by mode.
n O T E
If you are connected to a private line, follow the same proce-
dure until the display shows "PUBL.LINE (PSTN)", press
the |/} keys to display: "PRIV.LINE (PBX)" and then con-
tinue as described in the procedure.
* *
on the extension. This
key
key to return the
O
THER USEFUL TRANSMISSION SETTINGS
T
O CHANGE THE POSITION OF YOUR NAME AND FAX
NUMBER
The information in the heading of the document to be sent
(name, fax number, date and time and number of pages)
may be received by your correspondent's fax machine
outside the text area immediately below the top edge of the
sheet or inside the text area, slightly lower down than in the
previous case.
Your fax machine is designed to send this information inside
the text area.
To change the position
Until the display shows:
The display shows:
The display shows:
Until the display shows:
/ To select the alternative parameter.
To confirm the setting.
To return the fax machine to the initial stand-by mode.
T /
O ENABLE DISABLE REPETITION OF A FAILED
TRANSMISSION FROM THE MEMORY
Until the display shows:
The display shows:
The display shows:
Until the display shows:
/ To view the other available option: "RETRANS. DOC.: ON".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
33